Graflex Blade Sockets - 3/4 Inch
| The original Graflex Blade Socket that started
it all! Suitable for most EL conversions, this socket is made for 3/4 inch blades. It has been known to fit competitor
EL systems and attaching hardware. Wholesale quantities and pricing listed below. Includes mounting screws. Click here for photos and retail listing.
|
$100
/ 20 Units
|
$250
/ 50 Units
|
|
|
MPP Blade Sockets - 3/4 Inch
| The MPP Blade Socket, modeled after the similar design
of the Graflex Socket. Suitable for most EL conversions, this socket is made for 3/4 inch blades. It has been known to fit competitor
EL systems and attaching hardware. Wholesale quantities and pricing listed below. Includes mounting screws. Click here for photos and retail listing.
|
$100
/ 20 Units
|
$250
/ 50 Units
|
|
|
Graflex Eye Thumbscrew - SECONDS
| The Graflex Eye Thumbscrew Seconds include our first attempts at
recreating a blade thumbscrew that matches the original eye thumbscrew. These seconds include thumbscrews that fit a Graflex, but have
a finer knurl on the side. Some of these have a large inner diameter that will not fit most Graflexes. Both types of thumbscrews
are included (mixed bag). However, the thumbscrews are very attractive and can be used for most generic non-Graflex or hardware Graflex
saber conversions. Click here for photos and retail listing of the current selling version. Does not include
plastic lens. |
|
|
|
Graflex Button Thumbscrew - SECONDS
| The Graflex Button Thumbscrew Seconds include our first attempt at
recreating a blade thumbscrew that matches the original red button. These seconds include thumbscrews that fit a Graflex, but have
a finer knurl on the side. These are idential to our current selling retail product, but include a finer knurl. The thumbscrews can be used
for most Graflex conversions (espically the A-style), generic non-Graflex or hardware Graflex saber conversions. Click here
for photos and retail listing of the current selling version. Does not include red plastic insert. |
|
|
|
Generic Switches
|
Generic Saber Switches. Black (Latching), White (Latching),
and Red (Momentary) [mixed bag]. Use these for your saber conversions and general custom made hilts. Heavy duty with a special
screw on mounting nut. Very handy! Some even use these for DV-EPVI Graflex conversions.
|
$60
/ 20 Units
(4 Total)
|
$100
/ 50 Units
|
|
|
